MPI - From imagination into form
Home PageProduct CatalogDetectable Warning PanelsCapabilitiesPhoto GalleryContact Us


Detectable Warning Panels Header

"Simply the best detectable warning system for the visually impaired!"

Detectable Warning Panels
Detectable Warning Panels


Find out why contractors and specifiers are talking about durable DetectaShield:
DetectaShield is one of the most affordable detectable warning systems available AND one of the most durable to increase your value even more!

DetectaShield Highlights

  • Dual traction design - Located on both truncated domes and bands of panel surface. Smooth dome sides increase audibility when cane strikes the surface.
  • Durability - Freeze/Thaw ASTM C1372-04: .09% avg. after 100 cycles exceeds requirement of 1%
  • Strength - 6,000 PSI far exceeds requirement of 3,500
  • Expansion - Expands and contracts with the concrete: (.007in/10 ft/10ºF)
  • Fiber reinforced - alkaline resistant glass fiber and polymerized concrete for toughness
  • Non-combustible
  • Safe and eco-friendly
  • UV resistant - does not degrade in sunlight
  • Chemical resistant - designed to resist the most corrosive of substances
  • Sealed -  designed to stand the test of time.
  • Made in the USA

Special Orders and Supply
Quotes for special orders and quantities are available by calling our distributors or Maher Products at 641-363-4330.

DetectaShield Warranty
The manufacturer shall warrant the detectable warning surfaces to be free from defects for a period of five years from date of substantial completion. The installation contractor shall warrant the installation to be free from defects for the same period. Warranty does not cover damage in whole or in part by conditions beyond the control of the manufacturer or installer, including but not limited to: use for which the material is not designed; casualty; faulty design or construction; failure of the substrate; damage caused by neglect or improper maintenance procedures and other causes not specified. This warranty is in lieu or all other warranties, expressed or implied, including but not limited to any warranty of merchant ability of fitness for a particular purpose.

For more information, contact us today. Distributors welcome.

DetectaShield Technical Information:

STRENGTH PSI REQUIREMENTS
Compression 6,000 + 3,500
DURABILITY ASTM C1372-04 REQUIREMENTS
Free/Thaw .09%* (avg) 1.0%

*After 100 cycles


Maher Products Inc. PO Box 145, Mingo, IA 641.363.4330